With the help of color-changing LEDs, you have complete control over everything-just set the perfect lighting, then sit up and relax!

How you control the LED strip depends on the type of LED controller you choose. Each LED controller of InStyle’ provides a complete palette|rich color} (if you want, you can also choose the pure fixed color option).

There are many wattages of LED tape. Each provides a different amount of light generation to meet your project requirements.

The wattage of a strip of LED tape is calculated based on meters. Then when buying your light belt, you need to continuously compare by determining the total wattage per meter, increasing the number of meters) and total lumens (lumens output per meter, increasing the number of meters). Don't just compare the actual number of LEDs per meter!

InStyle offers LED tapes with power ranging from 5W per meter to 24W per meter.

InStyle’ strip lights are mounted on a first-class PCB (printed circuit board) to provide sufficient heat for the energy and brightness of the LED.

Our narrowest LED tape PCB is 8mm wide and 3mm horizontally. Our widest PCB is 12 mm wide and 3 mm deep.

Our LED light strips are manufactured in accordance with standards and provided with 5m reels. But with InStyle, you will get a personalized solution to help your installation tasks go smoothly-so if you know the size of the project, we will cut/weld your LED tape order to the exact length (or length .

Then, you can buy LED strips of exactly the same length, for example, if you only need 1.75 meters, then you don’t have to discard a 3.25 meter 5-meter reel.

(Remember, different LED tapes have different cutting point spacing. Depending on the form of LED tape you choose, the cutting point spacing is 25mm, 50mm, 100mm, or 166mm. Start checking each requirement item webpage for details.)

Normally, we do not provide customized LED lines longer than 6.5m. This is because a longer length will produce a voltage drop at its end (because the LED strip-LED} PCB cannot maintain a consistent current over this length). This means that your LED tape will not look too shiny at the end of any strip longer than 6.5 meters.

For useful information on setting up LED strips in tasks that need to run more than 5 meters, please refer to our support page to learn how to best install large tasks.

InStyle actually has a wide range of extrusions (LED pages) in stock. You can enhance the appearance of the unhidden LED light strips by just using extrusions, resulting in a more professional finish. The extrusions provide additional safety for LED lights installed outdoors or in wet/humid areas.

Every LED tape item of InStyle’ can be installed in our LED strip light extrusions. Our extrusion products range from corner LED pages to frosted extrusion products made specifically for stair treads, risers and skirting boards, to optical lenses that can make your LED lights brighter.

LED extrusions are sold in lengths of 1m and 2m. They can be cut to size using only a hacksaw. For more information about our LED lighting extrusion series, please see here.