It is important to choose quality strips to ensure long life and flawless operation.The led strips are among the most used light sources ever.Often used as atmosphere lights, today they are often proposed as the main light sources of an environment.This is due to the leaps and bounds of LED technology, which has increasingly high-performance, resistant and optimized chips in terms of energy consumption.The LED strips are also very popular for their versatility.They are flexible, take up little space and can be adapted in length.It is important to choose quality strips to ensure long life and flawless operation.A vast assortment of led strips can be found on luceled.com.There are some common mistakes that are made both during the choice of the strip and during their assembly.Let's see what they are and how we can avoid them.Those who are not familiar with LED strips, but also in the lighting sector in general and LED lighting, most likely do not even know what the degree of protection is.This abbreviation is always indicated on the product box, and marked by the letters IP, followed by two numbers, for example IP20.The first number indicates the level of protection of the device from solid objects and particles, while the second indicates its resistance to liquids.The higher the numbers, the greater its resistance.The maximum protection level is IP68, which indicates a LED strip that can also be immersed in water.It is therefore clear that if we had to mount it outside it would not be absolutely recommended to mount one with IP20 protection degree.Usually the led strips have dotted lines every 2.5-5 cm that indicate the exact point where to cut.To avoid ruining it we have to be precise.The led strip should adhere best along its entire length.The rear surface, in fact, acts as a heat sink.Especially when you decide to place the LED strips in a point of greater use, it is necessary to use an aluminum profile.This has a protective function on the strip, as it allows it not to accumulate the heat produced.Aluminum is in fact an excellent heat sink.The protective cover of a profile also allows you to protect the strip from external elements such as smoke and humidity.Not all led strips have the same power.To last as long as possible, they must be connected to a power supply that supports at least 20% of the power developed by the strip.If, for example, we have a 100 watt led strip, we will use a power supply of at least 120 watts.Another mistake to absolutely avoid is to press the LED chips with your hands or with tools.Although protected by the protective casing, the chips could break easily.Even the breakage of one or some chips could ruin the entire effect of the LED strip, which will lose uniformity and continuity of lighting.News.it is the great source of social information.Current affairs, television, news, sports, gossip, politics and all the news about your city.To report any errors in the use of confidential material to the editorial staff, write to media@contents.com: we will promptly remove any material that infringes the rights of third parties.