RGBW Controller for LED Neon Strip Lights, DC5V Controller from China factory
MC-KZQ-106
 
LED Controller Remote Controller Led Remote Controller Rgb Controller Led Rgb Controller Wireless Remote Controller Rgb Strip Remote Controller Led Rgb Controller Remote Rf Rf Led Rgb Strip Controller Rgb Led Dmx Remote Controller Led Rgb Driver Remote Controller Rgb Led Touch Remote Controller


RGBW Wall Mounted Touching LED Controller for neon strip,LED Lights

Controller Application:
RGB touching Controller is new generated product by our company. The controller is adopted
glass panel and ABS plastic to base. Professional PCB design to avoid circuit problem. We adopt high precision capacitance touch control chip, increases the touch sensitivity, reduces trigger which caused by mistake. It is used for controlling a variety of lamp which source of light is LED.Luxury Design, Fashion appearance. The controller can be wall mounted installation. White and black panel is optional.
Can be connected to all led lights in DC5V, DC12-24V. Example: led module, point source of light, flexible strip, wall washer ect. Install convenience and operate easily. It can be applied to hotel decoration, home decoration, commercial lighting area and leisure place ect. According to the actual need of customers,it can carry out RGB jump,fade in and out,static signle color and other effects of change.

Technical Specification:
1. 3CH output, 4A/CH, 12A/3CH
2. Input voltage: DC5V, DC12-24V
3. Max Power: 60W @ 5V; 144W @ 12V; 288W @ 24V
4. Connecting mode: common anode
5. Static Power consumption: <1W
6. Size: 86*86*34mm
7. Net Weight: 185g
8. Gross Weight: 215g

User Instruction: 


 Enlarge capacity connection method: 
If you want to connect more lights, please follow up the below connection method via Amplifier: 

Installation instruction

Notice:
1.Connect the light cable to controller, then connect to power supply. Make sure the
connection correctly before power on.
2. Make sure the power is DC12V-24V, Otherwise, the controller will be broken
3. When touch by hand, the indicator on top left corner shows red, which means that you have already touch it. If not, you do not touch it yet
4. Normally, the indicator lights around the binding post will always light after connecting. Or there is something wrong with the wiring